Internet for video calls: what you need and how to improve quality
Few things are as awkward as freezing in the middle of a meeting or hearing "you're breaking up". The good news is that most video call problems have known causes and simple fixes.
What really matters on a video call
Many people think "more megabits" fixes video calls. In reality, four factors are involved, and download speed is usually the least critical:
- Upload speed. Your picture and your voice travel out of your home to everyone else. Many connections have far less upload than download, and upload is what decides how others see and hear you.
- Latency. If it is high, conversations get clumsy and people interrupt each other without meaning to. We explain it in what is latency.
- Jitter. If latency varies a lot, voices sound robotic and video freezes. More in what is jitter.
- Packet loss. Every lost packet is a piece of voice or picture that never arrives. More in packet loss.
Video call platforms adjust quality automatically: when they detect a limited connection, they lower video resolution to protect the audio. That is why a stable connection with modest bandwidth often works better than a fast but unstable one.
Check your connection before the meeting
Open SuperPing a few minutes early and look at the Current quality section:
- MOS of 4.0 or higher (green): your connection is in good shape for talking.
- MOS between 3.1 and 3.9 (orange): you will probably notice some gaps. Apply the tips below.
- MOS below 3.1 (red): the call is going to suffer. If you can, switch networks or plug in a cable before you start.
Check jitter and loss too. If either is orange or red, you know what to tackle. MOS is explained in detail in what is MOS.
A practical checklist for stable video calls
Before you start
- Plug in a cable if your computer allows it. It is the most effective improvement.
- If you use Wi-Fi, move closer to the router and, when nearby, use the 5 GHz network.
- Pause cloud backups, file syncing and large downloads on every device in the house.
- Close tabs and programs that use the network, such as streaming in the background.
- Restart the router if it has been running for days and the connection feels unstable, but not one minute before the meeting.
During the call
- Use a headset with a microphone. It reduces echo so the app does not have to filter as much noise.
- Turn off your camera if the connection gets worse. Voice uses far less than video and is what matters most.
- Turn off virtual backgrounds if your computer is struggling: the extra processing can cause stutters that look like network problems.
- Avoid sharing your screen with video playing if your upload is limited.
If problems keep coming back
- Check SuperPing's Metrics charts to see whether latency or jitter always rise at the same time of day. It could be congestion at your provider during busy hours.
- Check whether the problem appears only on your computer or on every device. If it is just one, look at its network drivers, VPN or antivirus.
- If the problem persists even over cable, document the outages with SuperPing's log and take them to your provider. We explain how in documenting outages to complain.
Network problem or computer problem?
Not every glitch is the internet's fault. If your computer is using nearly all of its processor (for example, with many tabs, heavy programs or a background effect), the video call app can stutter even when the connection is perfect.
A quick way to tell: if SuperPing shows the connection in green, with low jitter and loss, while the call keeps breaking up, check processor usage in your task manager. If it is maxed out, the bottleneck is the computer.
In short
For a good video call, stability and upload speed matter more than download megabits. Check MOS, jitter and loss in SuperPing before joining, use a cable if you can and keep other devices from saturating the network during the meeting.