Wi-Fi or cable: how to tell if your home network is the problem
When the internet fails, we tend to blame the provider. But very often the problem is much closer: in the Wi-Fi at home. The good news is that this one you can fix yourself.
Why Wi-Fi is less stable than a cable
A network cable is a private road: data travels along it without competing with anyone. Wi-Fi, on the other hand, uses radio waves that:
- Weaken with distance and obstacles, especially concrete walls, mirrors, metal furniture and water (aquariums, for example).
- Share the airwaves with your neighbors' networks. An apartment building can have dozens of networks fighting over the same channels.
- Suffer interference from other devices such as microwaves or some cordless phones.
- Are shared among every connected device. The more devices use the network at once, the longer each one waits.
When the signal is poor, Wi-Fi retries transmissions, and every retry adds delay. That turns into more latency, more jitter and sometimes packet loss.
The definitive test: compare with a cable
The quickest way to know whether Wi-Fi is the problem is to measure with and without it:
- Open SuperPing with your device on Wi-Fi and let it measure for 10 to 15 minutes.
- Connect the same device to the router with a network cable and measure for another 10 to 15 minutes.
- Compare latency, jitter and loss in Current quality and in the Metrics charts.
If everything is green over cable but jitter or loss shows up over Wi-Fi, you have your answer: your provider is delivering the connection fine and the problem is the wireless network. If the problems also appear over cable, the source is probably the router or the provider.
If your device has no network port, a USB-to-Ethernet adapter is cheap and very handy for troubleshooting.
Signs that Wi-Fi is the problem
- The connection is fine near the router and poor in other rooms.
- Problems get worse in the evening, when your neighbors are also using their Wi-Fi.
- A wired device works fine while the wireless ones struggle.
- Speed changes a lot when you move just a few meters.
How to improve your Wi-Fi
Place the router well
- Put it somewhere central and high up, not on the floor or inside a cabinet.
- Keep it away from thick walls, mirrors, microwaves and large metal objects.
- If it has external antennas, point them in different directions (one vertical and one horizontal, for example).
Use the right band
Most modern routers have two bands:
- 2.4 GHz: reaches farther and gets through walls better, but is slower and more crowded.
- 5 GHz: faster with less interference, but shorter range.
Rule of thumb: if you are close to the router, use 5 GHz; if you are far away or behind several walls, 2.4 GHz may be more stable. Some newer routers also offer 6 GHz, which is even faster with shorter range.
Change the channel
If you live in an apartment building, try changing the Wi-Fi channel in your router's settings or your provider's app. Many Wi-Fi analyzer apps for phones show which channels are least busy.
Be careful with repeaters
Cheap Wi-Fi repeaters extend coverage, but they often add latency and cut speed, because they have to receive and retransmit over the same airwaves. If you need to cover a large home, these usually work better:
- A mesh system with several nodes.
- An access point wired to the router.
- Powerline adapters (internet over your electrical wiring), which work well in some homes and poorly in others.
Keep the router up to date
- Update its firmware when the manufacturer or provider allows it.
- Restart it now and then.
- If it is many years old, consider replacing it: old routers do not cope well with many devices at once.
When should you always use a cable?
For your work computer, your games console and the TV you use for high-quality streaming, a cable will always be the most stable option. Leave Wi-Fi for phones, tablets and devices that move around.
In short
Before blaming your provider, compare your connection over Wi-Fi and over cable with SuperPing. If the cable is fine, the problem is your wireless network, and it is usually solved by placing the router better, picking the right band and channel, or swapping repeaters for a mesh system.