Skip to content

What is MOS and how is call quality measured?

Updated: · 4 min read · Daniel Chivico

When you want to know whether your connection can handle a call, checking three or four numbers separately is not practical. That is what MOS (Mean Opinion Score) is for: a single score that sums up how a call would sound.

Where MOS comes from

MOS was born in telephone quality testing. A group of people would listen to calls and each would rate them on a scale from 1 to 5. The average of those ratings was the MOS. The ITU (International Telecommunication Union) describes this kind of assessment in its Recommendation P.800.

The classic scale looks like this:

MOS Quality
5 Excellent
4 Good
3 Fair
2 Poor
1 Bad

In practice, not even a perfect call reaches 5, because voice compression and the limits of the channel take something away. That is why the highest real-world values for a conventional voice call are around 4.3 or 4.4.

Estimating MOS without asking anyone

Having people listen to calls is no use for measuring a network in real time. So the ITU developed the E-model (Recommendation G.107), which calculates a score called the R-factor from network characteristics such as delay and packet loss. The R-factor runs from 0 to 100 and is then converted into a MOS value.

The idea is intuitive: start from maximum quality and subtract points for each problem.

How SuperPing calculates MOS

SuperPing uses a simplified version of the E-model that is common in monitoring tools:

  1. It calculates an effective latency: average latency, plus twice the jitter, plus a small fixed margin for processing.
  2. It starts from a maximum R-factor and subtracts points based on that effective latency. While effective latency is low, it subtracts little; past a threshold, it subtracts much more.
  3. It also subtracts 2.5 R points for each percentage point of packet loss.
  4. It converts the final R-factor into a MOS between 1 and 4.5.

The result appears in Current quality, on each target's card and in the MOS chart in the Metrics section, with these colors:

MOS in SuperPing Color What to expect
4.0 or higher Green Clear calls.
3.1 to 3.9 Orange Some noticeable gaps or delay.
Below 3.1 Red Calls that are hard to keep going.

What SuperPing's MOS is not

It is important to be clear about its limits:

Even with these limits, it works very well for what matters day to day: knowing whether right now is a good time for a call and spotting the hours when your connection gets worse.

How to use MOS day to day

In short

MOS turns latency, jitter and loss into a single score from 1 to 5 that represents call quality. SuperPing estimates it with a simplified version of the ITU E-model: it is not a certified measurement, but it is a quick, useful reference to decide whether your connection is ready for a call.

To understand each ingredient on its own, read what is latency, what is jitter and packet loss.

Keep reading