Skip to content

Speed vs stability: why lots of megabits don't guarantee a good connection

Updated: · 4 min read · Daniel Chivico

Internet plans are sold by megabits: 100, 300, 600, 1000. It is natural to assume more megabits means a better connection. Yet plenty of people on very fast plans still have choppy calls and laggy games. Why? Because speed and stability are different things.

Bandwidth: how much fits

Megabits per second (Mbps) measure bandwidth: how much data can pass through your connection each second. Think of a highway: bandwidth is the number of lanes. More lanes let more cars through at once.

Bandwidth matters when you move lots of data:

Stability: how fast and how consistently it responds

Stability shows up in three things SuperPing measures:

Calls, video calls and online games use little data, but they need it to arrive quickly and on time. A voice call fits comfortably into almost any modern connection. What ruins it is not a lack of lanes, but traffic jams.

The traffic-jam problem: bufferbloat

This is where a little-known but very common phenomenon comes in: bufferbloat.

Routers and modems have buffers where they hold data they cannot send right away. When the connection fills up, for example because someone is downloading a game or uploading photos to the cloud, those buffers fill up too. If they are too large, the data for your call or game ends up queuing behind the download.

The result: your latency, normally 30 ms, can jump to hundreds of milliseconds while someone is using the whole connection. And that happens even if you have lots of megabits, because the buffers fill up all the same.

How to spot bufferbloat with SuperPing

You can run a simple test:

  1. Open SuperPing and wait for latency to settle. Note the values in Current quality.
  2. In another tab or on another device, start a speed test or a large download.
  3. Watch SuperPing while the test runs.

If latency and jitter shoot up during the download and return to normal when it ends, you have bufferbloat. The higher they climb, the more you will notice it in calls and games when someone maxes out the connection.

How to reduce bufferbloat

When does paying for more megabits make sense?

More megabits do help when the problem is capacity:

But if the problem is drops, jitter, packet loss or latency spikes, raising your megabits rarely solves it. In those cases it is better to look at the Wi-Fi (Wi-Fi or cable), the router and the quality of your provider's line.

Reading both together

Situation What it usually means
Lots of megabits and SuperPing in green Fast, stable connection.
Lots of megabits, but high jitter or loss A stability problem: Wi-Fi, router, bufferbloat or provider.
Few megabits, but SuperPing in green Stable connection; it may fall short when many people use it at once.
Few megabits and SuperPing in red Limited and unstable connection: check your network and consider complaining or changing plans.

In short

Megabits tell you how much can pass through your connection; stability tells you how well it responds. For calls, video calls and games, stability matters more. Use SuperPing to check whether your connection stays stable even when someone maxes it out, and before paying for more megabits, make sure the problem is not stability.

Keep reading